Ricoh 1075 All in One Printer User Manual


 
User Tools (System Settings)
74
5
Accessing User Tools (System Settings)
This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
Note
Operations for system settings are
different from normal operations.
After using User Tools, be sure to
exit. p.74 Exiting from User
Tools
Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {
{{
{Energy
Saver}
}}
} or {
{{
{Clear Modes}
}}
} key is
pressed.
Changing Settings
Note
If a key operator code has been set,
the key operator code entry dialog
box appears. Enter the code, and
then press the [OK] key. p.90
Key Operator Code
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Press the [System Settings] key.
C
CC
C
Select the desired menu, and then
press the desired key.
D
DD
D
Change settings by following in-
structions on the display panel,
and then press the [OK] key.
Note
To cancel changes made to set-
tings and return to the normal
function display, press the {
{{
{User
Tools/Counter}
}}
} key.
Exiting from User Tools
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
Changing system settings is fin-
ished, and the machine returns to
Copy or Print mode.
Note
You can also exit from User
Tools by pressing the [Exit] key.
MartiniC1_GBzen2_FM.book Page 74 Friday, April 19, 2002 2:18 PM