Filter
Top Products
Basics
20
1
Envelopes
Note
❒ When copying on envelopes, use the bypass tray and specify the size. See ⇒
P.43 “When Copying onto Envelopes”
❒ Specification of envelopes are as follows:
❒ You can load up to 10 envelopes (72 - 90 g/m
2
, 19 - 24 lb) onto the bypass tray
at a time, without forcibly preassign them. However, make sure that the en-
velopes are not damp, and that the top of the stack is not higher than the limit
mark on the side guide ⇒ P.43 “When Copying onto Envelopes”
❒ Load the envelopes with the flaps aligned to the right side fence. The flaps
should be securely folded down.
❒ Make sure that there is no air in the envelopes before setting.
❒ To get the better copy quality, it is recommended that you set the right, left,
top, and bottom margin, to at least 15 mm (0.6") each.
❒ Do not copy on both sides of envelopes.
❒ Load only one size and type of envelope at a time.
❒ Before loading envelopes, flatten the leading edges (side being fed into the
printer) of them by running a pencil or ruler across them.
Metric version Inch version
Weight
72 – 90 g/m
2
19 – 24 lb
Recommended weight and
size
72 g/m2, 114
×
162 mm (C6
Env)
24 lb, 3
7
/
8
"
×
7
1
/
2
" (Mon-
arch)