Filter
Top Products
Copying
50
2
User Codes
If the machine is set to use the User
Code function, operators must input
their user codes before the machine
can be operated. The machine keeps
count of the number of copies made
under each user code.
Note
❒ When the machine is set for user
codes, the machine will prompt
you for your user codes after the
power switch is on or the Auto Re-
set comes into effect.
❒ To prevent others from making
copies using your user code, press
the {
Clear Modes
} and {
Clear/Stop
}
keys simultaneously after copying.
Reference
For setting user codes, see ⇒ P.81
“1. General Features
4
/
4
”.
Auto Start—Entering Copy
Job Settings During the Warm-
up Period
If you press the {
Start
} key during the
warm-up period, the {
Start
} key will
blink, and your copies will be made
as soon as warm-up finishes.
A Make any adjustments to copy
settings during the warm-up peri-
od.
B Set your originals.
C Press the {
{{
{
Start
}
}}
} key.
The {
Start
} key indicator alternate-
ly flashes red and green.
Note
❒ To cancel Auto Start, press the
{
Clear/Stop
} key.
Original Tone
The key tone sounds and an error
message is displayed when you leave
your originals on the exposure glass
for about two seconds after copying.
Note
❒ To cancel this function, see “11.
Original Tone” in ⇒ P.80 “1. Gener-
al Features
3
/
4
”.