Troubleshooting
142
6
Removing Jammed Staples
Note
❒ Curled paper may cause staples to jam. To avoid this, turn copy paper over
in the tray. If there is no improvement, change to stiffer copy paper.
❒ When the booklet finisher is installed, after removing jammed staples, staples
will not be ejected the first few times you try to use the stapler.
Reference
For types of finisher, see p.17 “External Options”.
1000-Sheet Finisher
• 1: Open the front cover of the finisher, and
then pull out the staple unit.
• 2: Hold the green lever while gently pull-
ing out the cartridge .
• 3: Open the cartridge's face plate.
• 4: Remove any jammed staples.
ZGJS801E
ZGJS802E
ZGJS813E
ZGJS814E
AdonisC4-AE_zen_F_FM_forPaper.book Page 142 Thursday, May 12, 2005 3:32 PM