Filter
Top Products
83
3. Program
Programs
You can store the frequently used
copy job settings in the machine
memory and recall them for future
use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned. ⇒ p.101
“Change Initial Mode”
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of the same
size, the paper tray prioritized
with the User Tools (System Set-
tings) will be selected first. ⇒“Pa-
per Settings” General Settings
Guide
❒ Programs are not cleared by turn-
ing the power off or by pressing
the
{
{{
{
Clear Modes
}
}}
}
key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
Storing a Program
A
AA
A
Edit the copy settings so that all
functions you want to store in this
program are selected.
B
BB
B
Press the
{
{{
{
Program
}
}}
}
key.
C
CC
C
Press the [Register] key.
D
DD
D
Press the program number you
want to store.
Note
❒ Program numbers with
m
al-
ready have settings in them.
Reference
⇒ p.84 “Changing a stored pro-
gram”