Filter
Top Products
Connecting to the Interfaces
11
1
Checking the Connection
This section describes how to check the IEEE 802.11b (wireless LAN) interface.
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖ When using in infrastructure mode
1. If [LAN Type] on the [Interface Set-
tings] / [Network] screen is not set to
[IEEE 802.11b], it does not light, even
if the main power is on.
2. If it is connected properly to the
network, the LED is green when in
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.
ZGDH600J
1
2