Ricoh LD270 All in One Printer User Manual


 
Network Settings
23
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
As to [Effective Protocol], check if the protocol to use is set as [Active].
[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
If [Delivery Option] is set to [On], check that IPv4 Address is set.
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
Ethernet Speed As required
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required
File Transfer Delivery Option As required
File Transfer Fax RX File Transmission As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required