Filter
Top Products
Registering Addresses and Users for Facsimile/Scanner Functions
242
7
H Press [Connection Test] to check the path is set correctly.
I Press [OK].
J Press [Exit].
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.209 “Changing a Registered Name”
p.240 “To locate the SMB folder manually”
p.240 “To locate the SMB folder using Browse Network”
To change the protocol
This section describes how to change the protocol.
A Press [FTP] or [NCP].
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous proto-
col.
C Enter each item again.
Reference
p.249 “Using NCP to Connect”
p.244 “Using FTP to Connect”