Filter
Top Products
System Settings on Main and Sub-machines
77
2
System Settings on Main and Sub-machines
This section describes the System Settings on the two machines during Connect
Copy.
When connect copy is in progress, the {User Tools/Counter} keys of the sub-ma-
chines remain disabled. To change the default settings, first press [Connect Copy],
which is highlighted on main machine's control screen, then clear the connect
copy job, and then make the required changes.
General Features
How the defaults in the General Features of copying of the main and sub-ma-
chines are used in connect copy will be explained.
❖ Program / Change / Delete User Text
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Panel Key Sound
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Warm-up Beeper
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Copy Count Display
• Settings made on the main and sub-machines do not affect the connect
copy.
• The copy counter is always displayed as Up (count up).
❖ Function Priority
• Settings made on the main and sub-machines do not affect the connect
copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy
will be cancelled. After that, the machine switches back to the mode select-
ed in Function Priority upon reaching the System Reset time.
❖ Print Priority
• Settings made on the main and sub-machines do not affect the connect
copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy
will be cancelled. After that, the machine switches back to the mode select-
ed in Function Priority upon reaching the System Reset time.