Ricoh LD270 All in One Printer User Manual


 
Network Settings
13
1
Network Settings
This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Settings Required to Use the Printer/LAN-Fax
This section lists the settings required for using the printer or LAN-Fax function.
Ethernet
This section lists the settings required for using the printer or LAN-Fax function
with an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
Machine IPv6 Address As required
Interface Settings/Network
IPv6 Gateway Address As required
Interface Settings/Network
IPv6 Stateless Address Autoconfiguration
As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
NCP Delivery Protocol As required
Interface Settings/Network
NW Frame Type As required
Interface Settings/Network
SMB Computer Name As required
Interface Settings/Network
SMB Work Group As required
Interface Settings/Network
Ethernet Speed As required
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required