Filter
Top Products
PPC-153 User’s Manual x
Chapter 4 Hardware Installation and Upgrade ............28
4.1 Jumpers and Connectors.................................................. 28
4.2 Disassembling the Panel PC............................................ 29
Figure 4.1:Unscrew the screw of side cover................. 29
Figure 4.2:Unscrewing rear cover of the panel PC....... 29
Figure 4.3:Opening the rear cover................................ 30
Figure 4.4:The PPC without the Rear Cover................ 30
4.3 Installing the 2.5" Hard Disk Drive (HDD) .................... 31
Figure 4.5:Screw the HDD metal frame to the side of the
HDD31
Figure 4.6:Place the HDD frame so it fits with the studs.
31
Figure 4.7:Plug the EIDE cable into the HDD ............. 32
Figure 4.8:Screw the right side of the metal plate to fix it
32
Figure 4.9:Screw the left side of the metal plate to fix it..
32
4.4 Installing the Central Processing Unit (CPU)................. 33
4.5 Installing the DDR SDRAM Memory Module............... 35
Figure 4.10:Placing the memory module in the DIMM35
Chapter 5 Jumper Settings &
Connectors 38
5.1 Jumpers and Connectors.................................................. 38
5.1.1 Setting jumpers ............................................................. 38
5.1.2 Jumpers and switches.................................................... 39
Table 5.1:Jumpers, switches and their functions.......... 39
5.1.3 Jumper Locations.......................................................... 39
Figure 5.1:Jumpers on the PPC-153 motherboard........ 39
5.1.4 Connectors.................................................................... 40
Table 5.2:Panel PC connectors..................................... 40
5.1.5 Locating connectors......................................................41
Figure 5.2:Connectors on PPC-153 motherboard......... 41
5.2 CPU Installation.............................................................. 42
5.3 CMOS Clear for External RTC (JP3) ............................. 42
Table 5.4:CMOS clear (JP3)......................................... 42
5.4 COM-port interface (JP4, JP5)........................................ 43
5.4.1 COM2 RS-232/422/485 setting (JP4)........................... 43
Table 5.5:COM2 RS-232/422/485 setting (JP4)...........43
Table 5.6:COM 1/2 Pin 9 setting (JP5)......................... 44
5.5 VGA interface ................................................................. 44
5.5.1 LCD panel power setting.............................................. 44
Table 5.7:LCD Panel Power Setting (JP2) ................... 44
Chapter 6 Driver Installation..........................................46