Ricoh PPC-154 Computer Monitor User Manual


 
3 Chapter 1
1.2 Specifications
General
Dimensions (W x H x D): 420 x 323 x 130.5 mm (16.54" x 12.72" x
5.12")
Weight: 7 kg(15.4 lbs)
Power supply:
AC model: 180 watts
Input voltage: 100~240 VAC , 4 A max. @ 50 ~ 60 Hz
Output voltage: +3.3V@16.8A, +5V@12A, +12V@10A
-12V@0.8A, +5VSB@2A
Disk drive housing: Space for one 2.5" HDD, one 12.7 mm compact
CD-ROM drive, and one slim type 3.5" FDD
• Front panel:
IP65 protection (not for the model with SAW touchscreen)
Standard PC functions
CPU: Supports Intel P4 and P4 Celeron up to 3.06 GHz. Also supports
Hyperthreading technology at 3.06GHz.
BIOS: Award 4 MB Flash BIOS, supports Plug & Play, APCI
Chipset: Intel 845GV / ICH4
2nd level cache: On-die 256 or 512 KB
RAM: Two 184-pin DDR DIMM sockets up to 2GB DDR SDRAM
PCI bus master IDE interface: Supports two connectors. Each con-
nector has one channel and supports two IDE devices. Each channel
supports PIO modes 0 ~ 4, DMA mode 0 ~ 2, and Ultra DMA 33/66/
100 simultaneously. The secondary connector is designated for the CD-
ROM drive. BIOS supports IDE CD-ROM boot-up
Floppy disk drive: Supports up to two FDDs (720 KB / 1.44 MB). One
built-in FDD included inside FDD housing
Parallel port: One parallel port, supports SPP/EPP/ECP parallel mode.
BIOS configurable to LPT1, LPT2, LPT3 or disabled
Serial ports: Four serial ports with three RS-232 ports (COM1, 3, and
4), one RS-232/422/485 port (COM2). All ports are compatible with
16C550 UARTs
Universal serial bus (USB) port: Supports up to four USB V2.0 ports