Filter
Top Products
23 Chapter 3
3.5 PS/2 Mouse and Keyboard
If you wish to use a full-size desktop keyboard and PS/2 mouse with your
panel PC, follow these instructions:
1. Be sure the panel PC is turned off.
2. Attach the keyboard to the 5-pin port of the purple color.
3. Attach the PS/2 mouse to the green color port.
4. Turn on the panel PC.
3.6 PCI Bus Expansion
The panel PC supports PCI bus expansion cards. To integrate a new PCI
bus card into your system, follow these instructions:
1. Turn off the panel PC.
2. Unscrew the eight screws on the top of the rear cover, and remove
it.
3. Remove the metal plate by unscrewing the single attaching screw.
4. Insert the PCI bus card into the PCI slot of the riser card. (See Fig.
3-6 overleaf.)
5. Run the setup program within your operating system to configure
your system.
Figure 3.5: PCI bus expansion