Ricoh 3035 All in One Printer User Manual


 
Settings You Can Change with User Tools
59
4
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or performing the last operation.
Note
Default: 1 minute(s)
The time can be set from 10 seconds to 240 minutes, using the number keys.
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.51 “Function Priority”.
Note
Default: On, 60 seconds
The time can be set from 10 to 999 seconds in 1 second increments, using
the number keys.
Copier/Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
Note
If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
Default: On, 60 seconds
The time can be set from 10 to 999 seconds, using the number keys.
Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
Note
Default: 30 seconds
The time can be set from 30 to 999 seconds, using the number keys.
Printer Auto Reset Timer(printer)
Specifies the time to elapse before the printer function resets.
Note
Default: On, 60 seconds
If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
AdonisC4-AE_zen_F_FM_forPaper.book Page 59 Thursday, May 12, 2005 3:32 PM