Filter
Top Products
PortraitLandscape
Original Copy
CMF260
Top to Top Top to Bottom
Top to Top Top to Bottom
Specifying Combined and 2-sided Copies
1. Press [Dup/Comb].
2. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK] key.
3. Press the [ ] or [ ] key to select paper orientation and page order, and then press the
[OK] key.
4. Press the [Escape] key.
The screen will show the selected copy mode.
• You can change the machine's default [Duplex/Combine] setting to always make photocopies in
combine mode. For details, see page 193 "Copier Features Settings".
• Setting combined and 2-sided copying automatically disables the [ID Card Copy] setting.
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For details, see page 228 "Administrator Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
4. Copying Originals
112