Filter
Top Products
Rimage Everest Printer
18 110632_L
Adjusting the print alignment and color density
In the Everest II Utility, you can adjust the print alignment and the color density.
# Tip: The Everest II Utility allows you to view information such as the current firmware version,
the serial number, and the installed ribbon type. Through the Everest II Utility, you can also
update your printer firmware.
1. Navigate to the Everest II Utility.
Note: The settings in the Everest II Utility can be modified only when the Everest printer
is idle (no jobs currently printing).
a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b. If you are using OS X v10.3, in the Print & Fax window, select Set up Printers. The
Printer list opens.
c. From the printer list, select CDPR21. The CDPR21 window opens.
d. From the CDPR21 toolbar, select Utility. The Everest II Utility opens.
2. In the Everest II Utility, select the Alignment tab. The alignment settings display.
3. View or change the alignment settings.
a. To modify the horizontal alignment, in the Horizontal Alignment Settings pane, move the
All Color slider.
b. To modify the vertical alignment, in the Vertical Alignment Settings pane, move the Color
and Monochrome sliders.
4. View or change the color density settings.
a. In the Everest II Utility, select the Density tab. The density settings display.
b. To modify the color density settings, in the Color Density Settings pane, move the Cyan,
Magenta, and Yellow sliders.
c. To modify the grayscale density settings, in the Grayscale Density Settings pane, move
the Black slider.
5. To save the modified settings, select Save.
Or
To close the window without saving your changes, select Quit.