Filter
Top Products
Maintain the Everest printer
110632_L 25
Clean the tacky rollers
Before you begin:
Power off the printer.
1. Remove the print ribbon. For specific
instructions, refer to page
20.
2. To access the tacky rollers, remove
the supply roll (the unused portion) of
the print ribbon from the print ribbon
carrier.
3. Clean the tacky rollers.
a. Apply isopropyl alcohol to the
sponge swab.
b. Use the sponge swab to clean
tacky roller 1.
c. Use the sponge swab to remove
any waxy buildup from other parts
of the ribbon carrier.
d. Reinstall the supply roll on the
print ribbon carrier.
e. Inside the printer, use the sponge
swab to wipe tacky roller 2.
4. Prepare the printer for use.
a. Install the print ribbon carrier.
Ribbon
carrier
Tacky
roller 1
Ribbon carrier
b. Close all latches.
c. Close the side cover.
d. Power on the printer. The printer
is ready.
Tacky
roller 2