RoboteQ AX1500 Computer Hardware User Manual


 
AX1500 Motor Controller Users Manual 13
SECTION 1 Important Safety
Warnings
Read this Section First
The AX1500 is a high power electronics device. Serious damage, including fire,
may occur to the unit, motors, wiring and batteries as a result of its misuse.
Transistors may explode and require the use of safety glasses when operated
in direct view. Please review the User’s Manual for added precautions prior to
applying full battery or full load power.
This product is intended for use with rechargeable batteries
Unless special precautions are taken, damage to the controller and/or power supply
may occur if operated with a power supply alone. SeePower Regeneration Consid-
erations on page 35 of the Users Manual. Always keep the controller connected
to the Battery. Use the Power Control input to turn On/Off.
Avoid Shorts when Mounting Board against Chassis
Use precautions to avoid short circuits when mounting the board against a metallic
chassis with the heat sink on or removed. See Attaching the Controller Directly to a
Chassis on page 183.
Do not Connect to a RC Radio with a Battery Attached
Without proper protection, a battery attached to an RC Radio may inject its voltage
directly inside the controllers sensitive electronics. See
Beware of Motor Runaway in Improperly Closed Loop
Wiring or polarity errors between the feedback device and motor in position or
closed loop position mode may cause the controller to runaway with no possibility
to stop it until power is turned off.