Rosewill L600N Network Router User Manual


 
L600N - Dual Band Wireless Router
26
CONFIGURATION GUIDE
Network Setup WAN Interface Setup
2. WAN Interface Settings: The router supports 5 modes of WAN
connection, including Dynamic IP (DHCP), Static IP (Fixed), PPPoE, PPTP,
and L2TP. You may need to confirm with your ISP before selecting your
connecting modes.
Dynamic IP (DHCP): L600N automatically obtains IP address, subnet
mask, and IP address of the gateway from the ISP.
Static IP (Fixed): Select this If the ISP provides the IP address, subnet
mask, and information about the gateway and DNS server. You may
need to obtain the information from your ISP.
PPPoE: Select this If your ISP provides dialup for user name and
password. DSL connection usually falls under here.
PPTP: This is a method for implementing virtual private networks. You
will also need User Name and Password for this mode. Most VPN
connection falls here.
L2TP: This is a method for implementing virtual private networks. You
will also need User Name and Password for this mode. Most VPN
connection falls here.