Filter
Top Products
L600N - Dual Band Wireless Router
65
Congratulations, L600N is now successfully configured, and your settings are now saved. You may now
connect other devices directly to the 4 wired ports on the back panel or connect wirelessly to L600N.
If you have question, Please feel free to contact us:
Support: techsupport@rosewill.com
Call Center: (800) 575-9885
Problem. My DSL connection is working, but I can not access the internet with L600N.
Solutions. Your Internet Service Provider (ISP) may require the entering of Login and password. To enter, please
click WAN Interface Setup under Network Setup, then select Yes for Does your Internet
Connection Require A Login?. Then select PPPoE to enter the connection information provided
by your ISP.
Problem. The Setup Wizard does not detect or configure my network.
Solutions. 1. Reset your modem, and power off your L600N by unplug the power adapter then plug back in.
2. Allow the wizard to detect your Internet connection one more time.
3. Static IP: You need to provide a fixed IP setting. Please check with ISP for IP information.
4. DSL Connection: Your internet connection needs login information. Please check with ISP if you do not have on hand.
5. Cable Modem Connection: Cable modem connection may require you to clone MAC address. click WAN Interface Setup
under Network Setup, then under Router MAC Address select Use Computer MAC Address or manually enter the MAC
address by selecting Use This MAC Address.
Problem. My IP address show up as 169.254.x.x and my computer tells me that I have “Limited or no Connectivity”
Solutions. Check if your computer is set as DHCP setting. Restart you computer and try again. If same thing occur, please try using another
computer or the wireless connection.
Problem. I am not getting maximum signal strength when right next to my router.
Solutions. The client may be too close to the router. You may want to step 5 ~ 10 feet away from the router.
You can also change the wireless channel to avoid wireless interference. Recommended channels use are 1, 6, and 11.
TROUBLESHOOTING