Filter
Top Products
ULTRA ATA/133 PCI RAID Card RC200 User Manual
15
HD connecting to RC-200 instead of motherboard. Please follow below steps a~f to
complete the installation.
a. Put the driver (the driver must fit the OS you want to install to the HD) into a floppy
disk and keep it in the floppy drive.
b. Plug the HD. Turn on PC and press F3 to complete the RAID set. After you complete,
save and left the setting.
c. Inset Windows installation disk and start the windows installation.
d. Press F6 at the beginning as the blue screen scanning.
This will let PC boot from a HD controller instead of motherboard HD.
e. Keep the floppy in floppy drive and follow the installation. Press “S” when the screen