Filter
Top Products
ULTRA ATA/133 PCI RAID Card RC200 User Manual
7
4. Reconnect the system power and other peripherals to your computer.
Important message for user
1. Backup all your data in HD before setting any RAID.
2. New HD connecting to RC-200 is recommended to “initial” and “format” before setting
a RAID. Otherwise, PC might find nothing in the system.
3. Please read the PDF file of “SATARAID5-UserGuide_v1.40” for basic RAID knowledge.
4. If you want to boot from correct HD either from motherboard HD or RC-200 HD, please
change from BIOS “booting sequence”.（You can download this document from
Rosewill website.）
5. If you want to use RC-200 as a un-RAID card, please do not enter the RAID BIOS and
set any RAID set at the beginning of booting. You can jump to P13 directly to complete
the driver installation. The only different is ignoring the step of RAID setting and the
driver setting is the same as a RAID card.
RAID Arrays
RAID Arrays are setup in the UltraATA 133 RAID PCI Card’s BIOS. Find your RAID set and
follow the steps in the order in which they appear.
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will destroy existing data
on the hard drive. Auto Configuration is recommended. For applications that require
custom chunk size, Manual Configuration is offered.