Filter
Top Products
BASIC CONFIGURATION ELX4-60
Rugged CCTV 2003.05.21 (v 1.0) 21
4.3.3. Delete Data
To delete a specific file range from the current recording HDD. This menu does not affect backup disk.
The beginning of the range is always the beginning of the recording on the HDD.
5. Configuration
5.1. Quick Setup
There are three menus for recording setup; Quick Setup, Normal Recording, Alarm Recording menu
in Configuration Menu. Quick Setup is the easiest set-up, activating all four analog cameras to record
with the same settings and conditions. Normal recording is the standard recording settings and can be
customized based on time and channel. Alarm recording is the recording schedule based on alarm
conditions (Motion Detection, Sensors, etc.) Also, Quick Setup has time setting menu.
5.1.1. Date/Time
When ELX4-60 is manufactured in factory, time zone will be set as “GMT + 9:00”.
Set the time to local time zone.
Changing ELX4-60 time may cause time conflict with recorded images. In this case, it is strongly
recommended to re-format the hard drives after making changes.
Button control
- Press [MENU] button on ELX4-60 front panel.
- Move to “Quick Setup” menu (First tab on the Configuration menu).
- Move to “Date/Time” below “Quick Setup ” using downward arrow button on ELX4-60 front panel.
- Press the [ENTER] button on ELX4-60 front panel.
- Set time. (The following picture will be displayed when setting time menu)
- In order to access each menu, press [ENTER] button after selecting it with upward/downward
arrow button on ELX4-60 front panel.