Filter
Top Products
ELX4-60 ADVANCED CONFIGURATION
56 2003.05.21 (v 1.0) Rugged CCTV
6.2. Camera Setting – IP Camera Channels (Ch. 5 ~ Ch. 16)
Setting up the IP Cameras is similar to setting up the analog channels. However there are specific
menus only for IP cam; for example, the ‘Configuration’ menu and ‘Network’ menu in the IP cam
setting menu.
6.2.1. Configuration
Button control
- Press [MENU] button and move to each “IPCam #5 to #16“ below “Camera” menu. Then select
“Configuration” menu by pressing the [ENTER] button and using the or buttons.
Name
Press the [ENTER] button to open the related dialogue box and change the camera name.
Status
Press the [ENTER] button and use the or buttons to set the camera to “On” or “Off.” Unlike
the analog channels, the IP cam’s default value is “Off.” After registering the IP camera, set the status to
“On.”