Filter
Top Products
BASIC CONFIGURATION ELX4-60
Rugged CCTV 2003.05.21 (v 1.0) 43
5.7.7. Network
There are four sub-menus; Network, xDSL, HRS, and Port Setting.
5.7.7.1. Network
This page is to define network type and set network addresses forELX4-60.
Type
This is to select proper network interface (Ethernet/xDSL) with which ELX4-60 is connected. If ELX4-60
is connected with Internet dedicated line, cable modem line or on LAN environment, select network
interface as ‘Ethernet.’
If ELX4-60 is connected on xDSL line that needs PPPoE process to connect to the Internet, administrator
should select ‘xDSL.’ However, if the xDSL line does not need PPPoE process, administrator should
select ‘Ethernet,’ even though ELX4-60 is connected on xDSL line.
DHCP
Basically, this menu is for the lines that have Ethernet interfaces such as Internet dedicated line, cable
modem line and LAN. If administrator activates ‘DHCP’ menu, all addresses are set automatically by
ELX4-60 detecting them from DHCP server of your ISP. The detected addresses are not displayed on the
screen. The addresses do not need to be entered manually unless ‘DHCP’ is disabled.