ELX4-60 ADVANCED CONFIGURATION
60 2003.05.21 (v 1.0) Rugged CCTV
6.4. Alarm Rec. - IP Cam Channel (Ch. 5 ~ Ch. 16)
The difference between the analog cam’s and IP cam’s menu is that IP cam’s event signal depends on IP
cam’s own function. The MD or sensor menu cannot be set like analogue camera because only the i-Rec
series can transmit event signals to ELX4-60.
IP Cam Event
Currently, only the i-Rec series is compatible with the ELX4-60 for IP cam events. Setting IPCam Event
to “On ” when an i-Rec channel is registered enables event data to be received based on the i-Rec Admin
Menu (ConfigStation) settings.
Recording Speed/Quality & Pre Alarm & Post Alarm
These settings are same as with the analog channels.