Filter
Top Products
ELX4-60 BASIC CONFIGURATION
24 2003.05.21 (v 1.0) Rugged CCTV
Button control
- Press [MENU] button and select to “Recording “ from the “Quick Setup” tab.
Configuration Status
Displays the recording setup status. If recording is configured with the Quick Setup, “Macro Setup” will
be displayed. If recording is configured with the “Normal” and “Alarm” recording, “Custom Setup” will
be displayed.
<Note>
1. When IP channel is 'Off' and all 4 analog cameras' normal recording conditions are set identically, the
status is marked as 'Macro Setup'. Otherwise, it is marked as 'Custom Setup'.
2. When IP channel is 'On' and all 16 cameras' normal recording conditions are set identically, the status
is marked as 'Macro Setup'. Otherwise, it is marked as 'Custom Setup'.
Channel Status
When “On,” all four analog channels will record based on the Quick Setup settings.
Recording Speed/Quality
There are four conditions (Low/Standard/High/Custom).
All conditions except “Custom” will synchronize “Speed (ips)” and “Quality” automatically; “Low”
setting is 1ips/Q5; “Standard” setting is 5ips/Q5; “High” setting is 15ips/Q5. When using the “Custom”
setting, Speed (ips) and Quality can be set separately.
Audio Recording
Enables the audio recording feature. If audio is set as “On,” and “Audio Synch with” is set as “All” (in
the “Audio” menu under the “System” tab) audio will be available in Playback Mode with all channels.
Apply
Confirms the Quick Setup Recording settings. ELX4-60 will begin recording after pressing the “Apply”
button and exiting from the recording menu.