Filter
Top Products
25
2007 RuggedCom Inc. All rights reserved Rev100
5.6 Ethernet Ports
5.6.1 Copper Ports
Parameter Specification Notes
Speed
10/100 Mbps Auto-negotiating
Duplex
FDX / HDX Auto-negotiating
Cable-Type
> Category 5 Shielded/Unshielded
Wiring Standard
TIA/EIA T568A/B Auto-Crossover, Auto-polarity
Max Distance
100 m
Connector
RJ45
Isolation
1.5 kV RMS 1-minute
Table 12: Ethernet Ports - Copper Specifications
5.6.2 Fiber Optic Ports
Speed
Standard
Mode /
Connector
Tx
λ
λλ
λ
(nm)
Cable
Type
2
(
µ
µµ
µ
m)
Tx Pwr
(dBm peak)
3
(Min / Max)
Rx
Sensitivity
(dBm Average)
3
Rx Saturation
(dBm Peak)
3
Typical
Distance
(km)
1
Power
Budget
(dB)
100Base-FX MM / ST 1310 50/125 -15.7 -33.5 -11 2 17
100Base-FX MM / SC 1310 50/125 -16/-11 -33 -11 2 17
100Base-FX MM / LC 1310 50/125 -19 / -14 -32 -14 2 15
100Base-FX MM / MTRJ 1310 50/125 -16/-11 -33.5 -11 2 17
100Base-FX SM / ST 1310 9/125 -15/-8 -32 -7 20 16.5
100Base-FX SM / SC 1310 9/125 -13/5 -31 -4 20 20
100Base-FX SM / LC 1310 9/125 -15/-8 -31 -5 15 16.5
Table 13: Ethernet Ports – Fiber Optic Specifications
NOTES:
1. Maximum segment length is dependent on factors such as fiber quality, and number of patches and splices.
Please consult RuggedCom sales associates when determining maximum segment distances.
2. To convert from average to peak add 3 dBm. To convert from peak to average, subtract 3 dBm.
5.7 Communication Standards
Protocol Standards
Ethernet IEEE 802.3
Table 14 - Communication Standard Compliance