Filter
Top Products
Installation
2.2 Panel and DIN Rail Mounting
RSG2000 series products can be ordered as panel/DIN mount chassis. Both
options involve the use of the panel/DIN adapters to be mounted on each side of
the chassis enclosure. The adapter allows for the chassis to be mounted on a
standard 1” DIN rail using the grooves in the adapter, and secured using the
included Philips screw. See Figure 15 for a PANEL/DIN mounting diagram.
Figure 15: RSG2300 Panel / DIN RAIL mounting diagram (connectors at top)
16
Rev100 © 2008 RuggedCom Inc. All rights reserved