Filter
Top Products
Technical Specifications
3.4 Copper Ethernet Port Specifications
The RSG2300 features a fixed set of three fixed banks of eight 10/100Tx copper
ports each, and can be ordered with additional 10/100Tx ports in slots 1 and 2,
and 10/100/1000Tx ports in slots 3 and 4. All copper ports have the following
specifications:
Parameter Specification Notes
Speed 10/100/1000 Mbps
Auto-negotiating;
1000Mbps modules supported in
slots 3 & 4 only
Duplex FDX / HDX Auto-negotiating
Cable-Type > Category 5 Shielded/Unshielded
Wiring Standard TIA/EIA T568A/B Auto-Crossover, Auto-polarity
Max Distance 100m
Connector RJ45
Isolation 1.5kV RMS 1-minute
3.5 Fiber Ethernet Port Specifications
Sections 3.5.1 through 3.5.3 list specifications of the optical transceivers used in
the dual-port modules available for the RSG2300. The specifications are
organized by signaling speed and then by order code. Module order codes are
contained within each product when assembled and configured at the factory.
Consult the RuggedCom ROS™ User Guide for help in obtaining the factory
configuration data.
3.5.1 10FL Ethernet Optical Specifications
Order
Code
Mode
Connector
Type
Cable Type (um)
Tx λ
(typ.)
(nm)
Tx min
(dBm)
Tx max
(dBm)
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(typ.)
(km)
Power
Budget
(dB)
62.5/125 -16 -9 18
FL01 MM ST
50/125
820
-19.8 -12.8
-34 -11.2 2
14.2
3.5.2 Fast Ethernet (10/100Mbps) Optical Specifications
Order
Code
Mode
Connector
Type
Cable Type
(um)
Tx λ (typ.)
(nm)
Tx min
(dBm)
Tx max
(dBm)
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(typ.)
(km)
Power
Budget
(dB)
62.5/125 -19 12
FX01 MM ST
50/125
1308
-22.5
-14 -31 -14 2
8.5
62.5/125 -19 12
FX02 MM SC
50/125
1308
-22.5
-14 -31 -14 2
8.5
FX11 MM LC 9/125 1310 -19 -14 -32 -14 2 13
62.5/125 -19 12
FX03 MM MTRJ
50/125
1308
-22.5
-14 -31 -14 2
8.5
29
© 2008 RuggedCom Inc. All rights reserved Rev100