Filter
Top Products
2. RuggedBackbone™ Modules
RuggedCom® RuggedBackbone™ 14 RX1501 Installation Guide Rev 104
2.2. Line Modules (LM)
The RuggedBackbone™ RX1501 supports six line modules in slots LM1 through LM6 . Several
types of line modules may be ordered, depending on the type, speed, and number of Ethernet
ports required.
The following illustrations show the typical port configurations and connectors available for
RX1501 line modules. For complete information on the available line modules, refer to the
RuggedBackbone™ RX1501 data sheet.
Only one T1/E1 module may be used per router.
On the RX1501, 2-port modules can only be inserted in LM1 and LM2.
2.2.1. Ethernet - Copper
Figure 2.3. CG01: 2 × 10/100/1000TX RJ45 Figure 2.4. 6TX01: 6 × 10/100/1000TX RJ45
2.2.2. Ethernet - Fiber
Figure 2.5. FX**/FG**: 2 × 100FX/1000SX/1000LX LC Figure 2.6. 4FX**: 4 × 100FC LC
Figure 2.7. FX03: 2 × 100 FX MTRJ
Figure 2.8. 4FX03: 4 × 100FX MTRJ
Figure 2.9. FX**: 2 × 100FX SC
Figure 2.10. FX**: 2 × 100FX ST
Figure 2.11. 10FL: 3 × 10FL ST