Filter
Top Products
Runco CL-810 Series Owner’s Operating Manual 45
PRE
L
IMINAR
Y
4.1
Selecting Video
Memory
• Press the MEM1 button on the remote control
to recall settings for the current input from the
“Memory 1” memory preset.
• Press ISF NIGHT to recall settings for the current input from the “ISF Night” memory
preset.
• Press ISF DAY to recall settings for the current input from the “ISF Day” memory
preset.
• Press FACT to recall the factory-default settings for the current input.
4.2
Selecting an Aspect
Ratio
Use these buttons to select the appropriate
aspect ratio for the type of program material being
viewed. For more information on aspect ratios,
refer to
Table 4-1.
4.3
Adjusting the Picture
• Press the BRT button on the remote control to
adjust the image brightness.
• Press CONT to adjust the image contrast.
• Press COL to adjust the image color level.
• Press TNT to adjust the hue of the image.
For more information about these controls, refer to Picture Adjustment on page 48.
4.4
Selecting An Input
Source
When you turn on the CL-810, it switches to the
last selected input and looks for a valid signal.
Use these buttons on the remote control to select
an input source directly.
4Operation
MEM1 FACT
ISF
DAY
ISF
NIGHT
ANA
16X9
VWIDELBOX
4X3
CINEMA
VCINE
2
1
BRT
CONT COL TNT
LIGHT
OFF
ON
VID S-VID COMP1
RGBHD HDMI
COMP2