Filter
Top Products
SOFTEN
Reduces edges and softens the image.
Example: Setting “SOFTEN” to “2”
3. Use the and buttons to select “SOFTEN”.
4. Use the and button to select “2”. The mode switches as follows each time the or button is pressed:
1 2 3 4 5
Setting the SIDEBAR ADJ. for the sides of the screen
Use this procedure to set the Sidebar Adj. for the parts on the screen on which nothing is displayed when the screen is set to
4:3 size.
Example: Adjusting the “SIDEBAR ADJ”
Perform the following operations.
1. On the MAIN MENU, select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.
2. Use the and buttons to select “SIDEBAR ADJ”.
3. To adjust the “SIDEBAR ADJ” ...
Use the and buttons to adjust the SIDEBAR ADJ
44
OSD (On Screen Display) Controls
LUM. SETTING : AUTO
ORBITER : OFF
INVERSE : OFF
IMAGE SWEEP : OFF
SOFTEN : OFF
PDP PROTECT
SEL. ADJ. RETURN
EXIT
Information
■ SOFTEN settings
OFF ........ Turns the SOFTEN function off.
1,2,3,4 .....Activates the SOFTEN setting. The higher numbers
create a softer image.
“SHARPNESS” can not be adjusted on the “PICTURE
ADJUST” menu.
Information
■ SIDEBAR ADJ. settings
This adjusts the brightness of the black (the Sidebar Adj.) for the
sides of the screen. The standard is 0 (black). The level can be
adjusted from 0 to 15. The factory setting is 3 (dark gray).
■ Restoring the factory default settings
Select “FACTORY” under the INSTALL 1 menu.
Note that this also restores other settings to the factory defaults.