Filter
Top Products
Setting the screen size for S1/S2 video input
If the S-Video signal contains screen size information, the image will be automatically adjusted to fit the screen
when this S1/S2 is set to AUTO.
This feature is available only when an S-Video signal is input via the VIDEO3 terminal.
Example: Setting the “S1/S2” to “AUTO”
Perform the following operations.
1. On the MAIN MENU, select “INSTALL 2”, then press MENU button. The “INSTALL 2” screen appears.
2. Use the and buttons to select “S1/S2”.
3. Use the
and buttons to select “AUTO”. The mode switches as follows each time the and buttons is
pressed:
OFF AUTO
4. Once the setting is completed...
Press the EXIT button to return to the INSTALL 3 screen. To return to the main menu, press the EXIT button once
more.
OSD (On Screen Display) Controls
AUTO OFF : OFFf
CINEMA MODE : ON
PDP PROTECT : OFF
SIDEBAR ADJ : 3
S1 / S2 : OFF
AUTO SIZE : ON
DVI TYPE
INSTALL 2 2 / 3
SEL. ADJ. RETURN
EXIT
PREVIOUS PG
NEXT PAGE
45
Setting the signal and black level for DVI signal
Example: Setting the “PLUG/PLAY” mode on “STB/DVD”
Perform the following operations.
1. On the MAIN MENU, select “INSTALL 2”, then press the MENU button. The “INSTALL 2”
screen appears.
2. Use the and buttons to select “DVI TYPE”, then press the MENU button. The “DVI TYPE”
screen apprears.
3.To set PLUG/PLAY mode to “STB/DVD” ...
Use the and buttons to select “STB/DVD”.
The mode switches as follows each time the and buttons is pressed:
PLUG/PLAY: PC STB/DVD
BLACK LEVEL: LOW
HIGH
Information
■ S1/S2 Settings
AUTO........ Adjusts the screen size automatically according to
the S1/S2 video signal.
OFF............ Turns the S1/S2 funtion off.
■ Restoring the factory default settings
Select “FACTORY” under the INSTALL 1 menu. Note that this
also restores other settings to the factory defaults.
PLUG/PLAY : STB/DVD
BLACK LEVEL : HIGH
DVI TYPE
SEL. ADJ. RETURN
EXIT
Information
■ PLUG/PLAY Settings
PC............... When connected to the PC
signal. BLACK LEVEL is set to “HIGH”
automatically. STB/DVD.... When connected
to a satellite receiver, DVD, etc. BLACK
LEVEL is set to “HIGH” automatically.
■ BLACK LEVEL settings
LOW ........ When connected to the PC
signal.
HIGH ....... When connected to the satellite
receiver, DVD, etc. Change “HIGH” into
“OFF” if the black level apprears gray.