Filter
Top Products
6-3
Random Access Adjustment Mode
Random access adjustment mode selection menu.
This is the main menu for the Random Access adjustment mode.
Through this menu, the following adjustments and features are accessible:
- Picture Tuning
Sync slow/fast (video/s-video)
Color Balance
- Geometry
Convergence
- Color Select
And also Orbiting, Contrast modulation and Soft Edge, if these options are
installed.
Picture Tuning
Highlight Picture tuning by pushing the control disc up or down and press ENTER.
The Picture tuning menu will be displayed.
Depending on the input source, the ‘Picture tuning’ menu will display different
items.
- Color Balance
- Sync slow/fast
- Peaking
Color Balance
The Color Balance function is used to select or adjust the color temperature of
white used by the projector.
The Color Balance can be adjusted in two different ways:
- fixed color balance. You have the choice between 3200k (reddish), 5400 K, 6500
K (white), or 9300 K (bluish).
- Custom white and black balance.
Fixed Color Balance
Highlight one of the 4 programmed color temperatures with the control disc and
press ENTER to display the desired color balance.
Custom Color Balance
Select custom white balance by pushing the control disc up or down and press
ENTER to start the adjustment.
Push the control disc up or down to adjust the red gain and push the control disc to
the left or right to adjust the blue gain. A bar scale indicates the amount of adjust-
ment.
Select custom black balance with the control disc and press ENTER to start the
adjustment.
Push the control disc up or down to adjust the red cut-off and push the control disc
to the left or to the right to adjust the blue cut-off.
When the color balance is adjusted, select continue by pushing the control disc up
or down and press ENTER.
Sync Fast/Slow Adjustment
The sync function is used to minimize horizontal jittering or tearing at the top to
the displayed image.
Highlight SYNC with the control disc and press ENTER to toggle between FAST
and SLOW.
Note: SYNC is normally used in the SLOW position. The FAST position is used to
compensate for unsteady sync pulses from older video playback equipment, such as
a VCR.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
then <ENTER>
<EXIT> to return
or
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING : ON
LINE DOUBLER : ON
Select with
<ENTER> to accept
<EXIT> to return.
or
PICTURE TUNING
SYNC : FAST
PEAKING : ON
LINE DOUBLER : ON
Select with
<ENTER> to accept
<EXIT> to return.
or
COLOR BALANCE
COLOR BALANCE
FIXED COLOR BALANCE
3200 5400 6500 9300
CUSTOM WHITE BALANCE
CUSTOM BLACK BALANCE
Select with arrow keys
then <ENTER>
You can
adjust red with
Blue with
<EXIT> to return
or
or
PICTURE TUNING
COLOR BALANCE
PEAKING : ON
LINE DOUBLER : ON
Select with
<ENTER> to accept
<EXIT> to return.
or
SYNC : FAST
ENTER will toggle Sync between FAST and SLOW.
EXIT will return to the Random Access Adjustment menu.