EYE-Q
TM
SETUP
The EYE-Q
TM
SETUP procedure needs to be done only once
after projector is correctly installed or whenever the projector is
reinstalled in another position.
To enter the EYE-Q
TM
SETUP menu:
Highlight EYE-Q
TM
by pushing the or keys of the
control disc.
Press the <ENTER> button to set the correct projector
configuration.
Setting the Configuration
When using a rear screen projector, this option must be set to
rear. Follow the steps described below to set the right configu-
ration:
Highlight FRONT (or REAR) by pushing the or keys
of the control disc.
Press the <ENTER> button to set the correct projector
configuration.
The EYE-Q
TM
SETUP menu provides you with easy to use
methods to focus the camera lens and to center the camera.
Please pay attention while doing it, as a properly focused
camera lens and correctly centered camera are prerequi-
sites for a perfect automatic convergence.
APX-4
Appendix 2
then <ENTER>.
then <ENTER>.
