Filter
Top Products
5-2
Start Up of the Adjustment Mode
RANDOM ACCESS - Random Access should be selected if the user intends to make
only a few adjustments.
SERVICE - Service should be selected if the user intends to delete blocks, change pass-
word or apply information.
EYE-Q - This selection will only be available when the subconvergence unit EYE-Q is
connected to the projector (standard on the DTV-947).
While in Guided or Random Access adjustment Mode, the user may use an external
source, an internally generated genlocked pattern or an internally generated multifre-
quency cross hatch pattern as a setup pattern. Some items in the Adjustment mode are
password protected. While selecting such an item, the projector asks you to enter your
password. (Password protection is only available when the password DIP switch on the
controller module is in the ON position. Contact a RUNCO authorized technician when
no password is requested during the adjustment procedure and password protection is
desired.)
Your password contains 4 digits.
a) Adjusting the projector with the RCU.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a ‘X’ appears on the screen under the displayed text ‘enter pass-
word’
When your password is correct, you get access to the ‘Adjustment mode’. When the
entered password is wrong, the message ‘Wrong password !!!’ will be displayed. The
projector stays on the previous selected item.
Factory programmed
password : 0000
b) adjusting the projector with the local keypad.
When the ‘compose password’ menu is displayed, select with control disc the first digit
of your password and press ENTER. Continue by selecting the second digit with the
control disc and press ENTER. Handle in the same way for the third and fourth digit.
When your password is correct, you get access to the ‘Adjustment mode’.
When the entered password is wrong, the message ‘Wrong password’will be displayed.
Once the password is correctly entered, all other password protected items are accessi-
ble without re-entering your password.
When re-entering the adjustment mode, it will be necessary to enter your password
again when selecting a password protected item.
enter
password
X X X X
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
EYE-Q
Source 1
Select with
then <ENTER>
<EXIT> to return
or
wrong
password
COMPOSE
PASSWORD
???
7 8 9
4 5 6
1 2 3
0
Select with
then <ENTER>
<EXIT> to return
or
,