Runco DTV-947 Projector User Manual


 
9-4
RS-232 CONTROL
COMMAND BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTE 6 BYTE 7 BYTE 8 BYTE 9
POWER ON/OFF $02 $00 $00 $0E $00 $00 $00 $00 $0E
POWER ON $02 $00 $00 $51 $0A $00 $00 $01 $5C
POWER OFF $02 $00 $00 $51 $0A $00 $00 $00 $5B
ENTER $02 $00 $00 $07 $00 $00 $00 $00 $07
EXIT $02 $00 $00 $08 $00 $00 $00 $00 $08
ADJUST $02 $00 $00 $09 $00 $00 $00 $00 $09
TEXT ON/OFF $02 $00 $00 $0D $00 $00 $00 $00 $0D
CURSOR UP $02 $00 $00 $21 $00 $00 $00 $00 $21
CURSOR DOWN $02 $00 $00 $22 $00 $00 $00 $00 $22
CURSOR LEFT $02 $00 $00 $24 $00 $00 $00 $00 $24
CURSOR RIGHT $02 $00 $00 $23 $00 $00 $00 $00 $23
BUTTON 0 $02 $00 $00 $10 $00 $00 $00 $00 $10
BUTTON 1 $02 $00 $00 $11 $00 $00 $00 $00 $11
BUTTON 2 $02 $00 $00 $12 $00 $00 $00 $00 $12
BUTTON 3 $02 $00 $00 $13 $00 $00 $00 $00 $13
BUTTON 4 $02 $00 $00 $14 $00 $00 $00 $00 $14
BUTTON 5 $02 $00 $00 $15 $00 $00 $00 $00 $15
BUTTON 6 $02 $00 $00 $16 $00 $00 $00 $00 $16
BUTTON 7 $02 $00 $00 $17 $00 $00 $00 $00 $17
BUTTON 8 $02 $00 $00 $18 $00 $00 $00 $00 $18
BUTTON 9 $02 $00 $00 $19 $00 $00 $00 $00 $19
CONTRAST + $02 $00 $00 $28 $00 $00 $00 $00 $28
CONTRAST - $02 $00 $00 $29 $00 $00 $00 $00 $29
BRIGHTNESS + $02 $00 $00 $2A $00 $00 $00 $00 $2A
BRIGHTNESS - $02 $00 $00 $2B $00 $00 $00 $00 $2B
COLOR + $02 $00 $00 $2C $00 $00 $00 $00 $2C
COLOR - $02 $00 $00 $2D $00 $00 $00 $00 $2D
TINT + $02 $00 $00 $2E $00 $00 $00 $00 $2E
TINT - $02 $00 $00 $2F $00 $00 $00 $00 $2F
SHARPNESS + $02 $00 $00 $36 $00 $00 $00 $00 $36
SHARPNESS - $02 $00 $00 $37 $00 $00 $00 $00 $37
The $ sign indicates a hex value and may not be required by your automation system. Remember that
each command requires 9 bytes
be sent to the projector. For example, to send a power on command from
a Phast Landmark Control system, enter the following string precisely as printed:
$02,$00,$00,$51,$0A,$00,$00,$00,$01,$5C
Use no spaces between the commas.