Runco VX-40d Projector User Manual


 
Operation
66 Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual
PRE
L
IMINAR
Y
Overscan: Image Overscan pushes the outside edge of the active picture area of the
video signal out beyond the edge of the display area.
Some television programs are produced based on the assumption that older television
sets may not display the outer edges of the broadcast picture area. Over scan effectively
trims away these inactive, outer edges and enlarges the remaining portion of the image to
fill the display area.
Select from 1% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or
desirable.
ISF Presets For each input, the VX-40d/-50d/-60d/-80d lets you save image quality settings as
presets that you can recall at a later time. You can create up to four presets per input and
resolution. Use the ISF Presets menu to recall saved image presets, or to save image
settings in the “Custom
1” or “Custom 2” memory location. The currently-selected preset
is indicated by a “
7” to its left; in the example shown here, ISF Night is selected.
You should save changes to any of the following settings to a preset; otherwise they will
be lost when a new input source or resolution is selected:
•Brightness
•Contrast
Color saturation
•Tint
Sharpness
To reset the Custom 1 and Custom 2 image presets to their factory defaults, select
Factory Default and press ENTER.
Information Select Information from the Main Menu to see information that uniquely identifies your
DHD Controller: its serial number, the installed hardware and firmware versions and the
firmware version build date. Should you ever need to contact Runco Technical Support,
this information will help them answer your questions or resolve product performance
issues.
ISF Presets
7
ISF Night
ISF Day
Custom 1 Save
Custom 2 Save
Factory Default
Information
Serial Number
Hardware 0
Firmware 0002.003A
Date Mar 15 2006