Filter
Top Products
ER-380 / ER-380M Program Mode Programming
•
83
Tax Programming
The ER-380 / ER-380M has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between .001% and 99.999%, or a 60 break point tax table.
Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added tax (VAT) that is included in
the price of the item.
Tax rate 4 may be set to function as the Canadian Goods & Services Tax (GST). Definitions for tax rates 1, 2, 3 & 4 are
made as part of tax programming.
• If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate
Programming" to enter the percentage rate.
• If you are entering a Canadian Goods and Services Tax (GST), use tax rate 4 for
the GST tax, and use tax rates 1, 2 and/or 3 for any other provincial tax or taxes.
See "Straight Percentage Tax Rate Programming" to enter the GST status and
percentage rate.
Important Note: After you have entered your tax program(s), test for accuracy by entering
several transactions of different dollar amounts. Carefully check to make sure the tax charged
by the cash register matches the tax on the printed tax chart for your area. As a merchant, you
are responsible for accurate tax collection. If the cash register is not calculating tax
accurately, contact your dealer for assistance.
Descriptor
- Refer to “Program 80 – Function Key Descriptor”
Straight Percentage Tax Rate Programming
When tax requirements may be met using a straight percentage rate, use the following method to program a tax as a
straight percentage.
Programming Straight Percentage Tax Rates and Status
1. Turn the control lock to the P position.
2. If the tax is a percentage rate, with a decimal. (0.000-99.999). It is not
necessary to enter preceding zeros. For example, for 6%, enter 06.000 or
6.000.
3. For the type of tax:
If the tax is a percentage added to the sale (normal add on tax),
enter:
0
If the tax is a percentage value added tax (VAT; calculated as part
of the sale), enter:
2