Filter
Top Products
86
•
Program Mode Programming ER-380 / ER-380M
Program 100 - PLU Status Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0, press the SBTL key.
0 SBTL01
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Refer to the "PLU Status Chart" to determine the values for
N1
through
N9
.
(If an address offers more than one option, add the values for each option and
enter the sum. For example, if you wish the PLU to be taxable by rates 1 and
3, add the values for your choices, 1 + 4, and enter the sum "5" for address N5.)
Enter the values you have selected, press the X/TIME key. (You do not need
to enter preceding zeros. For example, if you are only selecting a value for
N9, i.e. auto tare by number 1, just enter 1.)
N3 N2 N1 N4 N5 X/TIME N6 N7 N8
N9
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH