Filter
Top Products
PCA-6189 User’s Manual 80
7.8 Installation under Windows 2000
If you are only using SCSI hard drives without any IDE HDD drive
installed. Please follow these steps:
1. Insert Windows 2000 CD Disk.
2. Press F6 immediately when it displays: “Set up is inspecting your
computer’s hardware configuration.”
3. Then it enter SCSI installation. Please insert SCSI driver floppy
disk.
7.9 Windows 9X Driver setup procedure
1. In the window 9x screen, click on “start” and select “setting”. Then
click on the “Control Panel” icon to select .System.