Filter
Top Products
PCA-6189 User’s Manual 36
3.4.15 Security Option
Choose an option for this setting to have the system prompt for a pass-
word every time the system boots or only when you enter setup.
System: The system will not boot and access to setup will be denied if the
correct password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if the cor-
rect password is not entered at the prompt.
3.4.16 APIC Mode
Use this setting to enable the APIC mode. The choices are Disabled or
Enabled.
3.4.17 MPS Version Control For OS
This function reports if an FDD is available for Windows 95. The selec-
tions are 1.1 or 1.4.
3.4.18 OS Select For DRAM > 64MB
Select OS2 only if you are running OS/2 operating system with greater
than 64MB of RAM on the system. Commands are Non-OS2 or OS2.
3.4.19 Report No FDD For WIN 95
This setting determines if the BIOS should report the absence of a floppy
disk drive to Windows 95. When set to Yes, the BIOS will assign IRQ 6 to
another device. This allows computers with no floppy disk drives to boot
into Windows 95 normally. When set to No, Windows 95 will detect the
absence of the floppy disk drive and halt the system with an error mes-
sage. Please note that this BIOS feature has no relevance in other operat-
ing systems. Only Windows 95 is affected. It does not matter what you set
this BIOS option to if you are using other operating systems.
3.4.20 Small Logo(EPA) Show
This setting controls whether or not the EPA logo is shown. The choices
are Disabled or Enabled.
Note: To disable security, select “PASSWORD SET-
TING” in the main menu. At this point, you will
be asked to enter a password. Simply press
<Enter> to disable security. When security is
disabled, the system will boot, and you can
enter Setup freely.