Filter
Top Products
PCA-6189 User’s Manual 46
3.10.9 Power On by LAN
Choose Enabled to resume system function by LAN, or choose Disabled
to resume system function by PCI card.
3.10.10 Power On by Modem
This item allows you to wake up the system via a COM port from the
remote host. The choices are Enabled and Disabled.
3.10.11 Power On by Alarm
The choices are Enabled and Disabled.
3.10.12 Primary IDE (0,1) and Secondary IDE (0,1)
Choose Enabled to set the system to resume from suspend mode when
Primary IDE (0,1) or Secondary IDE (0,1) is active. The choices are
Enabled and Disabled.
3.10.13 FDD, COM, LPT PORT
Choose Enabled to set the system to resume from suspend mode if FDD,
COM port, or LPT port is active. The choices are Enabled, and Disabled.
3.10.14 PCI PIRQ [A-D]#
When this value is set to Enabled, the system will resume from suspend
mode if an interruption occurs. The choices are Enabled and Disabled.
3.11 PnP/PCI Configurations
Figure 3.10: PnP/PCI configurations screen