Filter
Top Products
Introduction 1-5
Paper jam
If the ERROR and the PAPER light both are steadily on, there is paper jammed in
the printer. See ‘Clearing Paper Jams’ on page 5-2.
ERROR
MANUAL
PAPER
READY
Manual feed mode
If the MANUAL and the READY light both are steadily on,
the printer is in manual feed mode. It happens when
you insert paper into manual feed slot, or when you
select ‘Manual Feed’ source from your software application.
Waiting for the next sheet from manual feed
If the MANUAL and the READY light both are blinking, the printer is waiting
for the next sheet to be fed in the manual slot.
ERROR
MANUAL
PAPER
READY
ERROR
MANUAL
PAPER
READY
Manual feed printing
If the MANUAL light is steadily on and the READY light is blinking, the printer
prints a job with paper fed manually.
ERROR
MANUAL
PAPER
READY
Cover open or no cartridge
If the red ERROR light is steadily on, the printer has experienced an error.
Check for:
•The printer cover is open or not closed securely.
•The print cartridge is either missing or not installed.
ERROR
MANUAL
PAPER
READY
Overrun or memory overflow
If the red ERROR indicator blinks for a while, then only the READY indicator
comes on, data which was too complex was sent to the printer or there is no
available memory in the printer.
The printer will print a page, telling you the error status. Simplify the page
layout and remove any unnecessary graphics. Or, you might want to add more
memory.
ERROR
MANUAL
PAPER
READY
ERROR
MANUAL
PAPER
READY
System error or operating error
If all indicator lights blink at the same time, it is a system error. If the indicator
lights are scrolling, it is an operating error. Turn the printer off and back on. If
your printer is still not operating properly and all indicators blink, you have to
call for service. Contact the point of purchase.