Filter
Top Products
Paper Handling 3-9
Note: If ‘Auto Continue’ option is available in your printer driver and if you
set the option to ‘ON’, the printer will automatically use paper in the
paper cassette if you do not feed paper into the manual feed slot within
15 seconds.
With ‘Auto Continue’ option set to ‘OFF’, the printer will not print
unless you feed paper into the manual feed slot. If you press and hold
the operator panel button for about 4 seconds, the printer uses just
one sheet from the paper cassette and waits for next sheet from the
manual feed slot.
Note: Never use envelopes with clasps, snaps, windows, coated linings, or
self-stick adhesives. These envelopes may severely damage the printer.
4. Gently insert the print material until the printer starts to pick it,
then let it go. The MANUAL light comes on.
5. Make sure that the paper source, the paper size, and the paper type
are set to the correct value for the print material you are using from
your software application, and start your print job.
6. When the MANUAL and the READY light both are blinking on the
printer operator panel, place another sheet in the manual feed slot.
7. When you are not using the manual tray, raise the tray and slide it
down into place.