Filter
Top Products
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
B.11
B
Take the following steps to change the frame type format:
1
In ready mode press the Menu button ( ) until you see
‘Network’ on the bottom line of the display. Press the Enter
button ( ) to access the menu.
2
Press the Enter button ( ) when ‘Config Network’ displays
on the bottom line.
3
Press the scroll button ( or ) to display ‘Yes’ on the
bottom line. Press the Enter button ( ).
4
Press the Upper Level button ( ).
5
Press the scroll button ( or ) until ‘Netware’ displays
on the bottom line. Press the Enter button ( ).
6
Press the Enter button ( ) when ‘On’ displays.
7
Press the Upper Level button ( ), then use the scroll
button ( ).
8
Press the Enter button ( ) when ‘Config Netware’
displays.
9
Press the scroll button ( or ) to display ‘Yes’ on the
bottom line. Press the Enter button ( ).
10
Press the Upper Level button ( ), then use the scroll
button ( ).
11
Press the Enter button ( ) when ‘IPX Frame Type’
displays.
12
Press the scroll button ( or ) until you see the desired
frame type and press the Enter button ( ).
13
Press the On Line/Continue button ( ) to return to
ready mode.