Filter
Top Products
U
SING
P
RINT
M
ATERIALS
3.11
3
If you want to print on previously printed paper from the
Multi-purpose Tray, the printed side should be facing up
with the uncurled edge towards the printer. If you
experience problems with the paper feeding, turn the paper
around.
N
OTE
: Make sure that you have
not loaded too much print
material.
The print material buckles if you
load a stack that is too deep or if
you push it in too far.
5
When you print a document, set the paper source to MP
Tray and select the correct paper type in the software
application. For details, see page 4.7.
N
OTE
: After printing fold away the
paper support extension and close
the Multi-purpose Tray.