Filter
Top Products
U
SING
THE
C
ONTROL
P
ANEL
2.14
Netware
You can select whether or not you want
to use the Netware protocol.
If you select
On
, you can access the
Config Netware
menu item.
In the
Config Netware
menu, you can
specify the frame type parameter used
on your network.
Config Netware
You can set this item only when you set
Netware
to
On
. This item lets you
select whether or not you set the frame
type parameter. Select
Yes
to select the
frame type.
If you select
Yes
, the
IPX Frame Type
option appears on the display.
IPX Frame Type
You can select this item only when you
set
Config Netware
to
Yes
. This item
lets you select IPX Frame Type.
•
Auto
:You can set the frame type
automatically.
•
EN_8022
: Select this value to use the
IEEE 802.2 frame type.
•
EN_8023
:Select this value to use the
IEEE 802.3 frame type.
•
EN_II
:Select this value to use the
ETHERNET II frame type.
•
EN_SNAP
:Select this value to use the
SNAP frame type.
Reset Network
This item reboots the network interface
card.
Default Set
This item performs a simple reset and
restores the factory default for the
network configuration.
Print Net CFG
This item prints a page showing the
network parameters you set.
Item Explanation
Options: On*, Off
Options: Yes, No*
Values: Auto*, EN_8022, EN_8023, EN_II,
EN_SNAP