Filter
Top Products
U
SING
W
INDOWS
P
OST
S
CRIPT
D
RIVER
B.2
Installing PS Drivers
PPDs, in combination with the PostScript driver, access the
printer features and allow the computer to communicate with
the printer. An installation programme for the PPDs is provided
on the supplied software CD-ROM.
Before installing, make sure that the printer and the PC are
properly connected with parallel, USB or network interface. For
information about:
• connecting with the parallel interface, see page 2.10.
• connecting with the USB interface, see page 2.11. For
Windows 98/Me, the USB driver must be installed. See
page 2.20.
• connecting with a network interface, see page 2.12. For a
ML-2550, you need to install an optional network interface
card; see “Installing a Network or Serial Interface Card” on
page F.6.
Installing PS Drivers
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\cdsetup.exe in
the Open box (where x is the drive letter for the CD-ROM
drive) and click OK.
2
Select the appropriate language.
If you can’t find the desired language from the screen, use
the scroll button on the bottom right of the window to display
more languages.
3
Click Install the Samsung Software-II on your PC.
(PostScript)
4
Click Next.
5
When the installation is completed, click Finish.